Author Topic: v2.0 p12 - Restore is working, but "Date Modified/Created" is the current time!  (Read 1526 times)

Offline Fastrack

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +2/-0
    • View Profile
Hi,

Well my drive issue is finally solved!  It ended up being the SATA cable! 

Just before I determined the cable issue I formatted the drive so I'm in the process of restoring 750GB of data.  However............. The "Date Modified", "Date Created" is not being restored!   Is this an oversite on the GUI?  Do I have to use the Command Line interface to restore the "Date Modified", "Date Created"

Thanks,
Ben
FlexRaid 2.1 Final (2015-11-01) | RAID6 T2 engine | Windows 7 64bit | C2D 6600 @ 2.40GHz | 4GB DDR3 | SageTV v9 | 5 x Hitachi 2TB DRU | 1 x Seagate 2TB DRU | 1 x Seagate 1TB DRU | 1 x Hitachi 2TB PPU

Offline Brahim

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,547
  • Karma: +204/-16
    • View Profile
The modified date should be getting restored for files.
FlexRAID does not restore the created date.

Offline Fastrack

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +2/-0
    • View Profile
The modified date should be getting restored for files.
FlexRAID does not restore the created date.

Using my test installation,  it looks like FlexRaid sets the Date Modified after the restore is complete! (But I'm sure you already knew that.. hehehe)  I'll update you if my PVR does not set it properly (I have DEBUG enabled as well)

EDIT:  Everything worked! Date Modified is set correctly!.  Only 2 corrupt files  ;).  But that's because I had deleted some files before I noticed the drive was having issues :'(  I'm very impressed!  8)
« Last Edit: November 05, 2011, 06:15:06 am by Fastrack »
Ben
FlexRaid 2.1 Final (2015-11-01) | RAID6 T2 engine | Windows 7 64bit | C2D 6600 @ 2.40GHz | 4GB DDR3 | SageTV v9 | 5 x Hitachi 2TB DRU | 1 x Seagate 2TB DRU | 1 x Seagate 1TB DRU | 1 x Hitachi 2TB PPU