Author Topic: Service not starting  (Read 925 times)

Offline amarshonarbangla

  • Full Member
  • ***
  • Posts: 165
  • Karma: +1/-3
    • View Profile
Service not starting
« on: July 06, 2014, 02:30:32 am »
I recently moved, so my server was down a couple days. When I started it back up, flexraid service won't start. I have attached the log below. One error that I can see there is "ERROR: Address already in use: JVM_Bind". Kindly help me resolve this issue and get my pool back up.

https://www.dropbox.com/s/9syp4d21gzhgzjg/FlexRAID.log

Offline Brahim

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,547
  • Karma: +204/-16
    • View Profile
Re: Service not starting
« Reply #1 on: July 06, 2014, 05:47:47 am »
Err... the message tells you everything. The port address is being used by something else.
Figure out the port you have configured for RAID-F if not the defaults (9595 and 8080) and change the RAID-F ports or stop the program using those ports.

Offline amarshonarbangla

  • Full Member
  • ***
  • Posts: 165
  • Karma: +1/-3
    • View Profile
Re: Service not starting
« Reply #2 on: July 06, 2014, 06:40:30 am »
Yes the problem is I am not being able to find which app is using those ports using netstat commands. Which ports would you recommend yo change flexraid to?

Offline Quaraxkad

  • Sr. Member
  • ****
  • Posts: 381
  • Karma: +24/-1
    • View Profile
Re: Service not starting
« Reply #3 on: July 06, 2014, 11:17:46 am »
Which ports would you recommend yo change flexraid to?

There is no recommended port, because it doesn't matter. 8080 is the typical default but you can use virtually any random number. Just avoid the common known ones under 1024 like 80, 21, etc.