Author Topic: tRAID pool auto-start  (Read 932 times)

Offline Brahim

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,547
  • Karma: +204/-16
    • View Profile
tRAID pool auto-start
« on: March 08, 2017, 07:58:41 am »
Hi. Sorry for bumping an old thread but I can't seem to get my storage pool to auto mount on Windows 10.
I've set both the "NZFS Web Client Service" and "NZFS Broker Service" to Automatic (Delayed start) but even after 4 minutes nothing happens.
I have to manually go into the WEBgui and start the storage pool.

I also tried to add a dependency via CMD "sc config FlexRAID depend= Netman" but got the following error:
[SC] OpenService FAILED 1060:

The specified service does not exist as an installed service.

Any help would be appreciated.

For tRAID, pool and array automatic start is configured at the RAID config level. No need to delay start the service or setup service dependencies.
Please see wiki for configuration.
« Last Edit: March 09, 2017, 01:17:46 pm by Brahim »

Offline thecig

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
tRAID pool auto-start
« Reply #1 on: March 08, 2017, 07:01:26 pm »
This topic is on RAID-F and you are running tRAID.
For tRAID, pool and array automatic start is configured at the RAID config level. No need to delay start the service or setup service dependencies.
Please see wiki for configuration.

Thanks for getting back to me. I didn't realise this topic was for RAID-F, apologies.
I've been scouring the Wiki for weeks, so that answer really doesn't help me that much.
Do you have a link to the wiki entry you are talking about?

EDIT: I just found my issue... I couldn't find the pool settings button.
Can you blame me though? Look at the label.



I think a label like "Storage Pool settings" would be more appropriate.

Anyway problem solved, thnx.
« Last Edit: March 08, 2017, 07:23:15 pm by thecig »