I just had a UOR fail (actually UOR3) that would drop from the array. My array is 20Tb so reconstruction is slowish, so I copied the data from the old drive to the replacement, and then reinitialized the array (remove the db file, log etc) to create and entirely new Raid array.
However I'm trying to run verify sync and getting the following error, did I just lose another drive? The drive does not drop from the array, I simply cannot run Verify sync. Any ideas?
Verify Sync RAID [tRaid] started at Fri Jan 19 13:03:42 GMT-800 2018
Name: Verify Sync RAID [tRaid]
Start Date: Fri Jan 19 13:03:42 GMT-800 2018
End Date: Fri Jan 19 13:39:28 GMT-800 2018
Duration: 00:35:45
Throughput: 13.028GB/s
Total Size: 27.290TB
Error Code = -1073741661
2575 stripe blocks failure
First byte failure at 3027031040
Last byte failure at 3383959040
Operation aborted!
Operation aborted due to disk error!
Failed UoR position = 3
Failed UoR ID = 1000000004
Verify Sync RAID [tRaid] ended at Fri Jan 19 13:39:28 GMT-800 2018
