Author Topic: cannot enter new entry into scheduler  (Read 136 times)

Offline uhthome

  • Newbie
  • *
  • Posts: 45
  • Karma: +0/-0
    • View Profile
cannot enter new entry into scheduler
« on: January 01, 2019, 03:36:05 pm »
I am trying to create a scheduled job to verify and sync the raid. Entering is easy, and when completed a message shows up reporting "success". However, the newly entered job does not appear in the "Scheduled Jobs manager". I have tried it at least 10 times, always the same. What can I do?

thanks a lot for any hints

Offline Skirge01

  • Full Member
  • ***
  • Posts: 194
  • Karma: +5/-0
    • View Profile
Re: cannot enter new entry into scheduler
« Reply #1 on: January 04, 2019, 02:10:06 pm »
I'm not sure if this is related to a similar issue I've had in tRAID, but I always have to re-create my array when this happens.  Something just fails and I wind up needing to delete and re-create my array (re-adding all DRU and PPUs) with a previously UNUSED name because a regular rename of an existing array does not resolve the issue.  I currently just keep incrementing a 3 digit number (tRAID###).  But, once I've done that work, I can magically add jobs again.  I can't confirm under RAID-F, but with tRAID, no data is overwritten or lost when the drives are placed back into the array as-is.  I just follow one of the guides and it works without issue.  Good luck!