Author Topic: Transfers half the speed when pooled using Snapshot RAID  (Read 6449 times)

Offline Brahim

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,547
  • Karma: +204/-16
    • View Profile
Re: Transfers half the speed when pooled using Snapshot RAID
« Reply #15 on: April 14, 2012, 01:42:15 pm »
Can you please attach your sys logs?

Offline Brahim

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,547
  • Karma: +204/-16
    • View Profile
Re: Transfers half the speed when pooled using Snapshot RAID
« Reply #16 on: April 15, 2012, 11:02:04 am »
Okay, can you download and replaced the following files in the <install root>\ext folder?
1. http://download.openegg.org/temp/path/libview.so
2. http://download.openegg.org/temp/path/libview_class1_0.so

Offline Srdjan

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Transfers half the speed when pooled using Snapshot RAID
« Reply #17 on: February 22, 2013, 05:08:42 am »
I have same issues with flexRAID and snapshot RAID with WHS2011. My write speed is always 115 MB/s and read speed goes from 115 MB/s to below 35 MB/s (and flexing between 20-35 MB/s untill it's finnished) in the middle process of reading a file (I've only tested with 5 GB files). If I disable FlexRAID I get stable read/write speeds 115 MB/s in my network. Is there any settings I can change to get better read speeds?

Thanx in advance

Offline medyaye

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Transfers half the speed when pooled using Snapshot RAID
« Reply #18 on: April 21, 2013, 12:37:50 am »
Hi, new user of FlexRaid, running snapshot on a WHS 2011 server.

I have similar trouble : 70MB/s writing, 35MB/s over samba share. When FlexRaid is off, i'm going back to 70MB/s Wrinting, 80MB/s reading.

Where do i find the "thread" parameter.

Maybe it's not the right place to do this, but the "Info and Stats" doesn't work for me (the page is empty, no graphical view).

Except those 2 things, FR is a great piece of software !